Biosketch

Dr. Swati Gangwar is working as an Assistant Professor in Department of Mechanical Engineering at NSUT New Delhi. She has served her duties as an Assistant Professor in Department of Mechanical Engineering at Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh (India) since 19th  Jan. 2015 to 10th June 2021. After graduation in Mechanical Engineering from Shri Ram Murti Smarak College of Engineering and Technology, Bareilly, Uttar Pradesh INDIA in 2009, she joined NIT Hamirpur for her Postgraduation in Mechanical Engineering with specialization of CAD/CAM. After that she had obtained Degree of Philosophy of Doctorate from MNIT Jaipur in 2016. She has published more than 90 papers in peer reviewed Journals and International/ national conferences (30 SCI/SCIE). She has authored 05 book chapters in reputed International/national publishers. She has guided 22 MTech students and awarded 02 Ph. D students. 

She received Young Achiever award 2018 by Institute for Exploring Advancis in Engineering for research paper Optimization of process parameters affecting Surface Roughness in Magnetic Abrasive Finishing Process, Materials & Manufacturing Process, Taylor & Francis, Volume 32, Isuue, Pages 1723-1729. I.F = 3.046 (SCI).

She has guided one Japanese student Ms. Saaya Nakachi from Department of Engineering and Mechanical Engineering University of the Ryukyus, Okinawa, Japan for her internship in 2018,2019.

She is a Reviewer of many reputed international journals

Silicon, Springer (As Reviewer)

Part E: Journal of Process Mechanical Engineering (SAGE) (As Reviewer)

Journal of Composite Materials (SAGE) (As Reviewer)

Journal of Advanced Manufacturing Systems (JAMS) (As Reviewer)

Her areas of interest are Composite materials, Tribology and Materials characterizations.

Areas of Interest

Composite materials, Tribology and Materials characterizations

Publications in International Journals

1) Swati Gangwar, Vikas Kukshal, Amar Patnaik, and Tej Singh, (2012). Computational optimization of TiO2 filled A384 alloy composites in erosive environment, International Journal of Computational Materials Science and Engineering 2012,1(3): 1250025.

2)  Swati Gangwar, Amar Patnaik (2013).  A Study on the Physical and Mechanical Properties of TiO2 Filled A380 Alloy Composites, International Journal of Composite Materials 2013, 3(3): 69-72.

3) Swati Gangwar , Vikas Kukshal , Amar Patnaik  and Tej Singh, (2013). Mechanical and fracture toughness behavior of TiO 2 -filled A384 metal alloy composites, Sci Eng Compos Mater, DOI 10.1515/secm-2012-0143.

4) Vikas Kukshal, Swati Gangwar and Amar Patnaik, (2013). Experimental and finite element analysis of mechanical and fracture behavior of SiC particulate filled A356 alloy composites: Part I, J Materials: Design and Applications, IMechE, 1-15 I.F. 2.014 (SCIE)

5) Vikas Kukshal, Swati Gangwar and Amar Patnaik, (2013). Experimental and finite element analysis of mechanical and fracture behavior of Al2O3 particulate-filled A356 alloy composites: Part II, J Materials: Design and Applications, IMechE, 1-13 I.F. 2.014 (SCIE)

6) Swati Gangwar, Amar Patnaik, I.K.Bhat. (2015). Tribological and Microstructure Behaviour of Quicklime (CaO) filled silicon bronze alloy for bearing material, Silicon (Springer Journal) DOI 10.1007/s12633-015-9352-1 I.F = 1.069 (SCI).

7) Swati Gangwar, Amar Patnaik, I.K.Bhat. (2015). Tribological and Thermo-mechanical analysis of CaO (Quicklime) particulates filled ZA-27 alloy composites for bearing application, Journal of Materials: Design and Applications DOI: 10.1177/1464420715609196. I.F = 2.014 (SCIE)

8) Swati Gangwar, Amar Patnaik, I.K.Bhat, (2015). Tribological and Microstructure Examination of Environmental Waste (Marble Dust) filled Silicon Bronze Alloy for Wear Resistant Applications, Silicon (Springer Journal) DOI: 10.1007/s12633-015-9401-9. I.F = 1.069 (SCI)

9) Gangwar Swati; Patnaik, Amar; Yadav, Prabhat ; Sahu, Sandeep; Bhat, (2019) Development and properties evaluation of marble dust reinforced ZA-27

alloy composites for ball bearing applications, Materials Research Express, Volume 6, Number 7 I.F. 1.929 (SCIE)

10) Shadab Ahmad, Swati Gangwar, Prabhat Chand Yadav, D.K. Singh (2017). Optimization of process parameters affecting Surface Roughness in Magnetic Abrasive Finishing Process, Materials & Manufacturing Process, Taylor & Francis, Volume 32, Isuue, Pages 1723-1729. I.F = 2.274 (SCI).

11) Sukrirti Yadav, Swati Gangwar (2018) A Critical Evaluation of Tribological Interaction for Restorative Materials in Dentistry, International Journal of Polymeric Materials and Polymeric Biomaterials, Taylor & Francis, I.F. 2.127 (SCI)

12) Sukriti Yadav and Swati Gangwar (2019) “The Effectiveness of functionalized nano-hydroxyapatite filler on the physical and mechanical properties of Novel dental restorative composite”, International journal of polymeric materials and polymeric biomaterials. (Taylor & Francis) I.F.- 2.127 (SCI).

13) Sukrirti Yadav, Vimal Kumar Pathak, Swati Gangwar, (2019) A Novel Hybrid TOPSIS-PSI Approach for Material Selection in Marine Applications, Sadhana, Vol. 44(3), Springer, I.F. – 0.769 (SCI)

14) Sukriti Yadav and Swati Gangwar (2020), In-vitro wear characteristics of nano-hydroxyapatite filled dental resin composite under two-body wear condition, Journal of materials science, vol. 55, n.-2, https://doi.org/10.1007/s10853-020-04792-3  Springer, I.F.-3.282 (SCI)

15) Sukriti Yadav and Swati Gangwar (2020), Mode-I Fracture Toughness Analysis of n-HAPs Filled Dental Restorative Composites; Silicon, https://doi.org/1.1007/s12633-020-00521-2 Springer, I.F.- 1.246 (SCI)

16) Sukriti Yadav and Swati Gangwar (2020), An Investigation of experimental dental restorative composites filled with nano-hydroxyapatite treated with different silanes, Silicon, https://doi.org/10.1007/s12633-020-00502-5. Springer, I.F.- 1.246 (SCI)

17) Rajneesh Kumar Singh, Swati Gangwar, D K Singh and Vimal Kumar Pathak, (2019) “A novel hybridization of artificial neural network and moth flame optimization (ANN-MFO) for multi-objective optimization in magnetic abrasive finishing, Journal of Brazilian Society of Mechanical Sciences and Engineering, Vol, 41(6), Springer, I.F. – 1.743 (SCI)

18) Singh R.K., Gangwar S. and Singh D.K., (2019) “Experimental Investigation on Temperature affected Magnetic Abrasive Finishing of Aluminium 6060”, Materials and Manufacturing processes, Taylor & Francis, I.F.- 3.046 (SCI) 

19) Singh R.K., Singh D.K. and Gangwar S. (2020) “On the temperature analysis of magnetic abrasive finishing of Aluminium 6060 using finite element method”, Machining Science and Technology, Taylor & Francis. I.F.- 3.046 (SCI). 

20) Vimal Kumar Pathak, Ramanpreet Singh and Swati Gangwar, (2019) “Optimization of three-dimensional scanning process conditions using preference selection index and metaheuristic method.” Measurement, Vol. 146, I.F. – 3.364 (SCIE)

21) Swati Gangwar, Vimal Kumar Pathak, Preliminary evaluations on development and material selection of high temperature vacuum casted marble dust-reinforced silicon-bronze alloy material for bearing applications, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020/10/2, SAGE publications I.F. – 2.014 (SCIE)

22) Swati Gangwar, Viresh Payak, Vimal Kumar Pathak, Anbesh Jamwal, Pallav Gupta, (2020) Characterization of mechanical and tribological properties of graphite and alumina reinforced zinc alloy (ZA-27) hybrid metal matrix composites, Journal of Composite Materials, SAGE Journals,  I.F. – 1.972 (SCI)

23) Swati Gangwar, Pratibha Arya, Vimal Kumar Pathak, (2020) Optimal Material Selection for Ship Body Based on Fabricated Zirconium Dioxide/ Silicon Carbide Filled Aluminium Hybrid Metal Alloy Composites Using Novel Fuzzy Based Preference Selection Index, Silicon, Springer, I.F. – 1.499 (SCI)

24) Swati Gangwar, Vimal Kumar Pathak, (2020) Dry sliding wear characteristics evaluation and prediction of vacuum casted marble dust (MD) reinforced ZA-27 alloy composites using hybrid improved bat algorithm and ANN, Materials Today Communications, Elsevier I.F.-2.678 (SCIE)

25) Swati Gangwar, Vimal Kumar Pathak, (2020) A critical review on tribological properties, thermal behavior, and different applications of industrial waste reinforcement for composites, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE publications I.F. – 2.014 (SCIE)

26) Swati Gangwar, Shivam Sharma, Vimal Kumar Pathak, (2020) Preliminary Evaluation and Wear Properties Optimization of Boron Carbide and Molybdenum Disulphide Reinforced Copper Metal Matrix Composite Using Adaptive Neuro-fuzzy Inference System, Journal of Bio-Tribo Corrosion, 7 (4), Springer, I.F. – 2.014

27) Swati Gangwar, Sukriti Yadav, Vimal Kumar Pathak (2021) Optimized selection of nanohydroxyapatite (n-HAP) filled dental restorative composites formulation for best physico-mechanical, chemical, and thermal properties using hybrid AHP-MOORA approach, Polymer Composite https://doi.org/10.1002/pc.26097, May 2021, I.F. – 2.265 (SCI).

28) Sugandha Singh, Swati Gangwar, Sukriti Yadav, (2017). A Review on Mechanical and Tribological Properties of Micro/Nano Filled Metal Alloy Composites, Materials today Proceedings, Elsevier, Volume 4, Issue 4, Part E, Pages 5583-5592 

29) Sukriti Yadav, Swati Gangwar, Sugandha Singh, (2017). Micro/Nano Reinforced Filled Metal Alloy Composites: A Review Over Current Development in Aerospace and Automobile Applications, Materials today Proceedings, Elsevier, Volume 4, Issue 4, Part E, Pages 5571-5582.

30) Singh R.K., Gangwar S. and Singh D.K. (2020) “Exploration of GRA based Multi-objective optimization of Magnetic Abrasive finishing process using Simulated annealing”, FME Transaction journal. Vol. 48 Pages 195-203. doi:10.5937/fmet2001195R.

31) Singh R.K., Gangwar S. and Singh D.K. (2019) “Exploration of Desirability Function Analysis Based Particle Swarm Optimization for Magnetic Abrasive Finishing of Mild Steel”, Journal of Advanced Manufacturing Systems Pages 1-21.

32) Sukriti Yadav and Swati Gangwar, (2018) An Overview on Recent progresses and future perspective of biomaterials, IOP Conference series: Material Science and Engineering, doi:10.1088/1757-899X/404/1/012013 .

33) Rajneesh Kumar Singh, D.K. Singh, and Swati Gangwar, (2018) Advances in Magnetic Abrasive Finishing for Futuristic Requirements- A Review, Materials today Proceedings, Elsevier, Pages 20455-20463 

34) Rajneesh Kumar Singh, D.K. Singh and Swati Gangwar, (2018)   Fuzzy logic optimization of process parameters affecting surface temperature in MAF, IOP Conference series : Material Science and Engineering 404 DOI: 1088/1757-899X/404/1/012017

35) Singh R.K., Gangwar S. and Singh D.K., (2019) GRA-ANN based Multi-Objective Optimization for Parametric Appraisal of Magnetic Abrasive Finishing Process”, Indian Journal of Engineering & Materials Sciences (Minor Revision under process). 

36) Ankit Saxena, Swati Gangwar, Gaurab Kumar Ghosh, Ritesh Kumar Patel, Vivek Chaudhary, (2020) Rheological properties analysis of MWCNT/graphene hybrid-gear oil (SAE EP-90) nanolubricants, Materials Today: Proceedings, Elsevier.

37) Mohd. Faizan, Swati Gangwar (2021) Tensile Behavior of Carbon Fiber Reinforced Polymer Composite using ANSYS 21", Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.03.724.

38) Sanjeev Kumar, Swati Gangwar (2021) Flexural Analysis of Green Composite Material using CATIA V5 for Tool Carrier.", Materials Today: Proceedings, MATPR-D-21-03621R1.

39) Somya Mishra, Swati Gangwar (2021) Mechanical Analysis of Carbon Fiber Reinforced Polymer Composite For Flow Pipes using CATIAV5 R14", Materials Today: Proceedings

40) Swati Gangwar, Ranjeet Kumar Singh, Prabhat Chand Yadav, Sandeep Sahu (2021), Physical, Mechanical and Tribological properties of Industrial Waste Fly Ash reinforced AA5083 Composite Fabricated by Stir Casting Process, Journal of Bio and Tribo-Corrosion, 7:127. 

41) Swati Gangwar, Neelesh Kumar Dubey, Vimal Kumar Pathak (2021), Experimental investigation and multiobjective optimization of multiple mechanical characteristics for chemically treated kenaf fibre reinforced epoxy composite using grey fuzzy logic, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 1-14, SAGE publications I.F. – 2.311 (SCIE)

Publications in National Journals 

41) Gulab Singh, Swati Gangwar (2015). Scheduling of FMS using Intelligent Heuristic Search Algorithm (IHSA), International Journal for Scientific Research & Development, 3(5) ISSN: 2321-0613.

42) Sikandar, Swati Gangwar (2016). Effect of Austempering and Martempering Temperature on Microstructure and Mechanical properties of EN 31 Steel, International Journal of Research in Advent Technology, 4(4) ISSN:2321-9637.

43) Ranjeet Singh, Swati Gangwar (2016). Fabrication and Study of sliding wear behavior of aluminum (AA5083) with fly ash composites, ELK Asia Pacific Journals, Vol. 1 ISBN 978-81-930411-8-5.

44) Sandeep Kumar Singh, Sikander, Swati Gangwar (2016). Parametric Analysis of Cutting Parameters for Laser Beam Machining Based on Central Composite Design, IJETMAS, ISSN:2349-4476.

45) Sandeep Kumar Singh, Swati Gangwar (2016). Parametric optimization of cutting parameters of Laser assisted cutting using Taguchi analysis and Genetic Algorithm, I-manager Journal on Future Engineering & Technology Vol. 11(3), Pages-36-42, ISSN Online: 2230-7184. 

Publications in National/International Conferences 

1) Swati Gangwar, Vinita Bharti, (2011) Fabrication of Metal Matrix Composites-A Review, A National conference on Recent advancement in mechanical engineering on 2-3rd December, SR Group of institution ,Jhansi (U.P) India. 

2) Vikas Kukshal, Swati Gangwar, Amar patnaik, (2011) Stress intensity factor for center crack , single edge crack and double edge crack for pure aluminum plate subjected to tensile loading,1st   International science congress (ISC -2011), 24-25th December, at Maharaja Ranjit Singh college of professional sciences, Indore ,M.P, India.

3) Swati Gangwar (2013) A study on the physical and mechanical of TiO2 filled A380 alloy composites, National conference on sustainable innovation through management, engineering, science and technology, December 1-2,  Rajshree Institute of Management & Technology, Bareilly, U.P., India.

4) Swati Gangwar, Amar Patnaik, I.K.Bhat, (2014) A review paper on physical and mechanical properties of metal alloy composites for different applications, 1st International conference on innovative advancement in engineering & technology, March 7-8,  Jaipur National University Jaipur, India.

5) Swati Gangwar, Amar Patnaik, I.K.Bhat, (2014) Wear performance of Marble Dust filled ZA-27 alloy composites for single row deep groove ball bearing in wind turbine gear box, International conference on  Emerging Paradigms and Practices in Global Technology, Management and Business Issues, December 22-24, NIT Hamirpur, Himachal Pradesh-177005,India 

6) Swati Gangwar, Amar Patnaik, I.K.Bhat, (2014) Physical , mechanical and tribological properties of particulate filled metal alloy composites for bearing applications: A Review, International conference on Newest drifts in mechanical engineering,  December 20-21, Department of mechanical engineering, Maharishi Markandeshwar University , Mullana, Ambala, Haryana-133207.

7) Vikash Kukshal, Swati Gangwar, Amar Patnaik, I.K.Bhat, (2014)  Mechanical characterization of nano TiO2 particles reinforced A384 aluminum alloy composites, International conference on  Emerging Paradigms and Practices in Global Technology, Management and Business Issues, December 22-24, NIT Hamirpur, Himachal Pradesh-177005,India.

8) Swati Gangwar, Amar Patnaik, I.K.Bhat, (2015) Fracture behavior for Marble Dust filled Copper alloy composite for Single Row Deep Groove Ball bearing in Wind Turbine Gear Box, National Conference on Futuristic Approaches in Civil & Mechanical Engineering (FACME-2015) March, 24th – 25th, Maharishi Arvind Institute of Engineering and Technology Jaipur, Rajasthan-302020, India.

9) Swati Gangwar, (2015) Mechanical and Fracture analysis for Calcium Oxide filled ZA-27 metal alloy composites for Single row deep groove Ball Bearing, International Conference on Emerging & Futuristics Trends in Engineering & Technology, Maharaja Agrasen Institute of Technology, May 8-9.

10) Swati Gangwar, Amar Patnaik, I.K.Bhat, (2015)  Surface Wear Behavior of Marble Dust (Stone waste) Filled ZA-27 Alloy Composites for Bearing Material, International Conference (ICMFA-2015), IIT BHU, oct.27 – 29.

11) Swati Gangwar. (2015) Fracture toughness behavior of nano TiO2 filled A384 metal alloy composites, National Conference on ‘Futuristic in Mechanical Engineering’ FME-2015, MMMUT Gorakhpur.

12) Swati Gangwar. (2015) Effect of graphite powder mixed dielectric on conventional wire-EDM ,National Conference on ‘Futuristic in Mechanical Engineering’ FME-2015, MMMUT Gorakhpur.

13) Swati Gangwar. (2015) Selection of bearing materials using PSI and TOPSIS optimization technique ,National Conference on ‘Futuristic in Mechanical Engineering’ FME-2015, MMMUT Gorakhpur.

14) Swati Gangwar. (2015) Technical and economical analysis of solar desalination technologies, National Conference on ‘Futuristic in Mechanical Engineering’ FME-2015, MMMUT Gorakhpur.

15) Swati Gangwar. (2015) Review on laser cutting machine process parameter optimization, National Conference on ‘Futuristic in Mechanical Engineering’ FME-2015, MMMUT Gorakhpur.

16) Swati Gangwar. (2015) Parametric Analysis of Cutting Parameters for Laser Beam Machining Based on Central Composite Design, 3rd International Conference on Innovative Research in Engineering Sciences and Management, ICIRESM211.

17) Swati Gangwar, (2016) A review on Mechanical and Tribological Properties of Micro/Nano filled Metal Alloy Composites An International Conference on Multifunctional Materials for Device Application (ICMDA-2016), NIT Patna, October 26-28, 2016.

18) Swati Gangwar, (2016) Micro/Nano Reinforced Filled Metal Alloy Composites: A Review Over Current Development in Aerospace and Automobile Application, An International Conference on Multifunctional Materials for Device Application (ICMDA-2016), NIT Patna, October 26-28, 2016.

19) Swati Gangwar, (2016) Cutting parameters and Performance of Fibre Reinforced Plastic Composite Materials: A Review, An International Conference on Multifunctional Materials for Device Application (ICMDA-2016), NIT Patna, October 26-28, 2016.

20) Sukriti Yadav, Swati Gangwar, (2016) A Review: Mechanical and Corrosive Behaviour of Micro/Nano Reinforced Filled Metal Alloy Composites, National Conference on Advances and Latest Trends in Automobile Engineering (NCALTAE-2016), October 18, 2016, ITM Geeda.

21) Sugandha Singh, Swati Gangwar, (2016) A Review: Mechanical and Tribological Behavior of Micro/Nano Reinforced Metal Alloy Composites, National Conference on Advances and Latest Trends in Automobile Engineering (NCALTAE-2016), October 18, 2016, ITM Geeda. 

22) Sukriti Yadav, Swati Gangwar, (2017) An Investigation of Bending Stress on Spur Gear Tooth using ANSYS, National conference on Futuristics in Mechanical Engineering, February 24-25, 2017, MMMUT Gorakhpur

23) Sugandha Singh, Swati Gangwar, (2017) Effect of Tribological properties on ZA 27 filled Metal Alloy Composite for Bearing Applications: A Review, National conference on Futuristics in Mechanical Engineering, February 24-25, 2017, MMMUT Gorakhpur

24) Sukriti Yadav, Swati Gangwar, (2017) Effect of Physical and Mechanical Properties on Hybrid Reinforced filled Aluminium alloy composite for Automobile application: A Review National conference on Futuristics in Mechanical Engineering, National conference on Futuristics in Mechanical Engineering, February 24-25, 2017, MMMUT Gorakhpur

25) Sugandha Singh, Swati Gangwar, (2017) Static Analysis of Automotive Drive Shaft Using ANSYS, National conference on Futuristics in Mechanical Engineering, National conference on Futuristics in Mechanical Engineering, February 24-25, MMMUT Gorakhpur

26) Vimal Kumar Pathak, Swati Gangwar, (2017) Fused deposition modeling parts with minimized GD&T error using PSO algorithm, National conference on Futuristics in Mechanical Engineering, February 24-25, 2017, MMMUT Gorakhpur

27) Divya, Rahul Kumar Sharma, Vandana, Shashank Tripathi, Swati Gangwar (2017) Comparison of the Best Incineration/Treatment Technique for Biomedical Waste, National conference on Futuristics in Mechanical Engineering, February 24-25, 2017, MMMUT Gorakhpur

28) Divya, Swati Gangwar, (2017) Thermal Energy Storage: A Review on Technical Advancement in the field of Solar Energy, National conference on Futuristics in Mechanical Engineering, February 24-25, 2017, MMMUT Gorakhpur.

29) Pratibha Arya, Swati Gangwar, Vimal Kumar Pathak, (2017) Study of Mechanical and Corrosive Behaviour of Metal Alloy Composites Ingrained with Micro and Hybrid Reinforcement, 4th International Conference on Multidisciplinary Research & Practice (4ICMRP-2017), 22nd December 2017, AMA Ahmedabad, ISBN: 978-93-5288-448-3.

30) Shivam Sharma, Swati Gangwar, (2017) A Review of Micro Particles Filled Metal Matrix Composite and Effect on Tribological Properties, 4th International Conference on Multidisciplinary Research & Practice (4ICMRP-2017), 22nd December 2017, AMA Ahmedabad, ISBN: 978-93-5288-448-3.

31) Pratibha Arya, Swati Gangwar, (2018) Analysis of Rivet Using Finite Element Discretization Technique on ANSYS Software, International Conference on  'Emerging trends in Materials and Mechanical Engineering'. Jointly organized by MNIT Jaipur & Poornima University Jaipur, 29-30 January 2018.

32) Shivam Sharma, Swati Gangwar, Pratibha Arya, (2018) Analysis of Domestic Gas Cylinder using Finite Element Discretization Technique, International Conference on  'Emerging trends in Materials and Mechanical Engineering'. Jointly organized by MNIT Jaipur & Poornima University Jaipur, 29-30 January 2018.

33) Pratibha Arya, Swati Gangwar, Shivam Sharma, (2018) “Fabrication of Aluminium Alloy (Al 7075) Hybrid Composite and Effect of Reinforced Particles on Physical And Mechanical Properties” International Conference on Recent Innovations in Science and Engineering, BIT Gorakhpur 1-2 April 2018.

34) Shivam Sharma, Swati Gangwar, Pratibha Arya (2018) “Fabrication and Effect of Molybdenum Disulphide and Boron Carbide filled Copper Metal Matrix Composite” International Conference on Recent Innovations in Science and Engineering, BIT Gorakhpur 1-2 April 2018.

35) Viresh Payak, Swati Gangwar (2018) “Tribological Behaviour of ZA – 27 Metal Alloy Composite for Bearing Races: An Overview” International Conference on Recent Innovations in Science and Engineering, BIT Gorakhpur 1-2 April 2018.

36)  Sukriti Yadav and Swati Gangwar, (2018) An Overview on Recent progresses and future perspective of biomaterials, International Conference on Contemporary Research in Mechanical Engineering with Focus on “Materials and Manufacturing” (ICCRME - 2018), Integral University Lucknow, 6-7 April 2018.

37) Rajneesh Kumar Singh, D.K. Singh and Swati Gangwar, (2018)  Technological Advances of Magnetic Abrasive Finishing for Surface Treatment- A Review, International Conference on Contemporary Research in Mechanical Engineering with Focus on “Materials and Manufacturing” (ICCRME - 2018), Integral University Lucknow, 6-7 April 2018.

38) Rajneesh Singh, Swati Gangwar, D.K.Singh, Shadab Ahmad, (2018) Multi-Objective Optimization of Magnetic Abrasive Finishing by Desirability Function Coupled with Genetic Algorithm, 3rd International Conference on Advanced Production and Industrial Engineering, October 5-6.

39) Sukriti Yadav and Swati Gangwar, (2019) “A study for Sorption and solubility characteristics of dental restoratives in the different oral environment”, 2nd International conference On Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2019), G.L. Bajaj Institute of Technology and Management, Greater Noida, May 3rd-5th.

40) Amitesh Kumar, Swati Gangwar, (2019) A critical Investigation of Waste Flue Gases Through Chimney National conference on Futuristic in Mechanical engineering (FME-2019)” March 28th -29th, Department of Mechanical Engineering,  Madan Mohan Malaviya University of Technology, Gorakhpur.

41) Sukriti Yadav and Swati Gangwar, (2019) “The performance of nanomaterials in Adhesive dentistry : A clinical review, National conference on Futuristic in Mechanical engineering (FME-2019)” March 28th -29th, Department of Mechanical Engineering,  Madan Mohan Malaviya University of Technology, Gorakhpur.

42) Ankita Singh, Swati Gangwar (2019) Experimental Investigation on Chemical assisted AISI 52100 Alloy Steel Using MAF, 1st International Conference on Applied Mechanical Engineering Research (ICAMER - 2019), May 2-4.

43) Sukriti Yadav, Swati Gangwar (2019) Long-term Solubility and Sorption Characteristics of Novel Dental Restoratives, IEEE Uttar Pradesh Section International Conference on Energy, Environment & Material Sciences (ICE2M-2019) 

44) Rajneesh Kumar Singh, Swati Gangwar, D.K.Singh (2019) Multi-Objective Optimization of Magnetic Abrasive finishing by Desirability Function with Genetic Algorithm, IEEE Uttar Pradesh Section International Conference on Energy, Environment & Material Sciences (ICE2M-2019)

45) Ranjeet Kumar, Swati Gangwar (2019) A Critical Assessment of Biomaterials for Hip Joint Replacement, IEEE Uttar Pradesh Section International Conference on Energy, Environment & Material Sciences (ICE2M-2019)

46) Prayag Narayan Singh, Ankit Saxena, Swati Gangwar, (2021) Tribological aspects of nanolubricant based on carbon nanotubes (CNTs) and Graphene -A Review, International conference on Future learning aspects of Mechanical Engineering (FLAME 2020), Department of Mechanical Engineering, Amity School of Engineering and Technology , 5th -7th August.

47) Neelesh Kumar Dubey, Swati Gangwar, (2021) Comparative analysis of different composites for Ankle Foot Orthosid : A Review, International conference on Future learning aspects of Mechanical Engineering (FLAME 2020), Department of Mechanical Engineering, Amity School of Engineering and Technology , 5th -7th August.

48) Ashutosh Pandey, Swati Gangwar, (2021),  International conference on Future learning aspects of Mechanical Engineering (FLAME 2020), Department of Mechanical Engineering, Amity School of Engineering and Technology , 5th -7th August.

49) Mohd. Faizan, Swati Gangwar (2021) Tensile Behavior of Carbon Fiber Reinforced Polymer Composite using ANSYS 21", International conference on Futuristic trends in Materials and Manufacturing, Materials Today: Proceedings, MATPR-D-21-02550.

50) Sanjeev Kumar, Swati Gangwar (2021) Flexural Analysis of Green Composite Material using CATIA V5 for Tool Carrier.", International conference on Futuristic trends in Materials and Manufacturing, Materials Today: Proceedings, MATPR-D-21-03621R1.

51) Somya Mishra, Swati Gangwar (2021) Mechanical Analysis of Carbon Fiber Reinforced Polymer Composite For Flow Pipes using CATIAV5 R14", International conference on Futuristic trends in Materials and Manufacturing, Materials Today: Proceedings, MATPR-D-21-04367R1

Books/Book Chapters

1) Proceedings of National Conference on Futuristic in Mechanical Engineering FME-2015, Year of Publication  November 2015.

2) Amar Patnaik, I.K.Bhat, Swati Gangwar, (2015). Effect of Fabrication and Characterization of Quicklime (CaO) filled ZA-27 Metal Alloy Composites for Single Row Deep Groove Ball Bearing, Handbook of Composite from Renewable Materials, Wiley scrivener Journal, Vol.2.

3) Sukriti Yadav, Swati Gangwar (2020) A narrative insight on the biocompatibility issues with dental alloys and other materials book edition entitled Alloy Materials and their Allied Applications” to be published by Wiley-Scrivener Publisher.

4) Rajneesh Kumar Singh, Swati Gangwar, D.K.Singh (2020) Technological advances in magnetic abrasive finishing for surface treatment of alloys and ceramics, book edition entitled Alloy Materials and their Allied Applications” to be published by Wiley-Scrivener Publisher. 

5) Jeeoot Singh, Swati Gangwar, Ravi Shankar (2019) Souvenir Edited of an International Conference on Energy, Environment & Material Sciences (ICE2M-2019) jointly organized by Madan Mohan Malaviya University of Technology Gorakhpur India and ENEA Italy held during December 01-03 at MMMUT Gorakhpur. IEEE Conference ID: 48764 

6) Sukriti Yadav, Swati Gangwar (2021) A study on the silane chemistry and sorption/solubility characteristics of dental composites in wet oral environment, Advanced Materials and Manufacturing Processes, CRC Press, Taylor & Francis.

7) Prayag Narayan Singh, Ankit Saxena, Swati Gangwar, (2021) Tribological aspects of nanolubricant based on carbon nanotubes (CNTs) and Graphene -A Review, Advances in Engineering Materials, Springer, ISSN 2195-4356, ISBN 978-981-33-6028-0, http://doi.org/10.1007/978-981-33-6029-7

8) Neelesh Kumar Dubey, Swati Gangwar, (2021) Comparative analysis of different composites for Ankle Foot Orthosis : A Review, Advances in Engineering Materials, Springer, ISSN 2195-4356, ISBN 978-981-33-6028-0, http://doi.org/10.1007/978-981-33-6029-7  

Patent (Filed)

  Name of Applicant: SWATI GANGWAR

  Title of the invention: Marble dust reinforced copper alloy composite fabrication

  Application No.1319/DEL/2015 A

  Publication Date: 26/06/2015