Biosketch

Experience 

• Associate Professor, Manufacturing Processes and Automation Engineering Division (MPAED), Netaji Subhas Institute of Technology, New Delhi, Govt. of NCT of Delhi (NSIT), INDIA – from June 2016 to till date.
• Associate Professor, BIT Sindri, Department of Science and Technology, Ranchi, Govt. of Jharkhand, INDIA – from June 2013 to June 2016.
• Associate Professor, MPAED, NSIT, INDIA – from May 2012 to June 2013. 
• Assistant Professor, MPAED, NSIT, INDIA – from May 2006 to May 2012. 
• Sr. Lecturer, MPAED, NSIT, INDIA – from May 2004 to May 2006. 
• Lecturer, MPAED, NSIT, INDIA – from May 2000 to May 2004. 
• Visiting Associate, MPAED, NSIT, INDIA – from Nov. 1997 to May 2000. 
• Pool Officer, CSIR in MPAED, NSIT, INDIA – from Nov. 1994 to Nov. 1997.
• Guest Faculty, MPAED, NSIT, INDIA – from Aug. 1994 to Nov. 1994. 
• Junior Scientist, Material Cutting Department, National Technical University “Kharkiv Polytechnic Institute”, Ukraine, Erstwhile U.S.S.R. – from Nov. 1990 to April 1994. 

Administrative Responsibilities 

• Head, Production Engineering Department, BIT Sindri, Govt. of Jharkhand (October 2015 – June 2016).
• Associate Head, MPAED, NSIT (January 2006 – February 2009).
• State Public Information Officer (SPIO), NSIT.
• Authorized signatory, cheques of NSIT – F.No.14(11)2007-08/A/c /NSIT.
• Warden, Boys Hostel – II, NSIT -  Hostel was established and made fully functional under my wardenship.
• Incharge, Academic Time-Table, NSIT.
• Superintendent, Practical exams.,NSIT - Streamlined conduct of practical exams in the Institute .
• Coordinator, Planning, NSIT -Made effective contribution in: Preparation of Five year plan document, Annual plan document, budget estimate (BE for the year 2008-09) and revised estimates (RE for the year 2006-2007) of plan schemes , preparation of proposals to be placed before expenditure finance committee (EFC).Replied  to the queries raised by Ministries/Universities/ Institutions etc.
• Faculty Incharge, Sanitation & Caretaking, NSIT -Handled effectively day-to-day activities relating to functioning and administration of the Sanitation & Caretaking section of the Institute.
• Faculty incharge / vice- chairman, Students’ Annual Technical Festival ‘Innovision 05’ & ‘Innovision 06, NSIT.
• Member, Committee for consideration for the amendment in the recruitment rules of various Technical/Ministerial posts of group A, B, C, & D in the Institute.

Laboratory Development 

CNC/FMS Lab

        This Lab was conceptualized and developed during the 1997-1998 academic session in order to provide our MPAE students with knowledge and hands-on experience in the area of computer integrated manufacturing and considering the emerging R&D in the area of manufacturing segment in the industrial world. The objective of the CNC/FMS Lab is to prepare the students industry ready and to acquire employability skill with the knowledge of CNC programming by using G & M codes and cutting path generation through 3D simulation software. In addition, this Lab helps in understanding the concept of FMS used in Industry. 

Contribution in the Publication of Technical Book

• Diamond Grinding of Hardmetals Under Electrical Discharge In-process Dressing Conditions” - Kharkiv: NTU “KPI”, 2003.-359 P.- In Russian Language (Almazno-Eskravoe shliphobaniye Tvyordikh Splabov – Kharkiv : NTU ”khPI”, 2003 – 359 P. – Russk.  Yazik).
• Contributed substantially in the conduct of experiments, preparation and analysis of experimental results, and other materials, based on which above mentioned   book is written. This book is of great interest for the manufacturing engineers, scientists, as well as for those engaged in the hard metal Industry.  

Areas of Interest

Grinding of Difficult-to-machine materials with wheels containing diamond abrasives, EDM -based Hybrid Process for machining of binderless/single phase nanostructured WC material, Dry machining. 

Publications in International Journal

 

Publications in National Journal

 

Publications in National Conferences

 

Publications in International Conferences

 

Books/Book Chapters

 

Publications (Click to expand)

1. S.K.Jha, R.M.Strelchuk, M.D.Uzunyan, “Esledovaniye e Analiz Sherokhobamoschi Poverkhnoschi Pri Shliphobanie Nanosmrtukmyrnikh Tvyordikh Splavov (Research and Analysis of the Surface Roughness in Grinding of Nanostructured Hard Materials”, International Scientific Technical Collection, Cutting & Tools in Technological System, Issue/Edition No.79, ISSN 2078-7405,2011, pp.46-51 (in Russian).

2. Siddharth Choudhary, Pratik Jain and Dr. S.K. Jha, “A new method for quantitative evaluation of diamond wheel sharpness in EDDG of advanced cutting tool material”, International Journal of Scientific & Engineering Research Vol.3, Issue 4, ISSN 2229-5518, 2012.

3. P.M. Strelchuk, S.K.Jha , “Isledobaniye I Analisis Proizvodichelnoschi Obrabotki Pri Shlifobanii Nanostrukturnikh Tvyordikh Splabov”, Bisoki Tekhnologii v Mashinobudubanii (High Technologies of Mechanical Engineering ) , Edition 22 vol 1 ISSN 2078-7677, 2012, pp.275-280 (in Russian).

4. R.M. Strelchuk, S.K.Jha, “ << BolKar >>.,Asovennoschi Eznosa Almaznikh Krugov pri Shifobanii Tvyordovo Splava << BolKar >>( Wear Peculiarities of Diamond Wheels When Grinding Nanostructured Hardmetal)”, International Scientific Technical Collection, p-347, Cutting & Tools in Technological System, Issue/Edition No.85, ISSN 2078-7405, 2015,  PP269-273 (in Russian).

5. Sharadindu Shekhar, Dr. S.K. Jha, “An Attempt to Reduce the Time Consumed by A Gas Cleaning System Used In Steel Industry, International Journal of Engineering and Technical Research” (IJETR), Volume-3, Issue-1, ISSN: 2321-0869, 2015, pp175-177.

6. Bhagwan Kumar Mishra, Baidyanath Yadav, S.K.Jha and A.P.Burnwal, “Fuzzy Set Theory Approach to Model Super Abrasive Grinding Process Using Weighted Compensatory Operator” ,International Journal of Research in Computer Applications and Robotics , Vol.3, Issue 5 ,ISSN 2320-7345 ,2015, pp62-68. 

7. Shamita Murmu, 2Jha, S. K. and 3Burnwal, A. P. “Fuzzy Set Theory Approach to Model Turning of Hardfaced Components Using Weighted Compensatory Operator”, International Journal of Current Research, Vol. 7, Issue, 09, ISSN: 0975-833X, 2015 pp.20014-20018.

8. H. Raj, S.K. Jha, and D.N.Paswan, “Optimisation of Process Parameter for Smelting and Reduction of Ferrocrome”, IJERT, , Volume 5, Issue 10, ISSN:  2278 – 0181, 2016, pp. 509-513.

9. S.K. Das, S.K. Jha, “Optimization of Tempering Temperature for Cavitation Erosion Resistance of a Modified 13 Cr – 4 Ni martensite Stainless Steel”, IJSAE Vol. 4, Issue 11, ISSN(e):2321 -7545, 2016, pp.6003– 6013.

10. A.V.Rudnev, S.K.Jha, “Esledobaniye Summarnovo Privedyonnovo Profilya Pri Shlifobanii Plastin << TOMAL-10>> Metodom Almazno-Eskrabovo Shlifobaniya (Predictive Modeling of Surface Roughness in Electrical Discharge Diamond Grinding  of Cutting Inserts made from CBN-based Composite Material)” , Cutting and Tools in Process Systems , Vol.-87,  ISSN 2078-7405,2017, pp144-148 ( in Russian). 

11. Trivedi A., Jha S.K., Choudhary S., Shandley R. (2019) “Fuzzy TOPSIS Multi-criteria Decision Making for Selection of Electric Molding Machine”. In: Saini H., Sayal R., Govardhan A., Buyya R. (eds)  Innovations in Computer Science and Engineering. Lecture Notes in Networks and Systems, vol 32. Springer, Singapore,  Online ISBN978-981-10-8201-6,  Print ISBN978-981-10-8200-9.