Sorry, you need to enable JavaScript to visit this website.
Dr. Pradeep Khanna
Associate Professor
Qualification
B.E, M.E, PhD.
Phone
9818388160
Email
[email protected]

Areas of Interest

Welding

Quality Control

 

 

 

 

 

 

Publications in International Journal

 

Publications in National Journal

 

Publications in National Conferences

 

Publications in International Conferences

 

Books/Book Chapters

 

Publications (Click to expand)
  1. R.S.Parmar and Pradeep Khanna, ‘Laser Beam Welding- Present Status and Future Prospects’ Souvenir, National Welding Seminar, Baroda, pp-29, December, 4-6, 2003.
  2. Pradeep Khanna and R.S.Parmar ‘Diode Lasers: Future of Laser Beam Welding.’ Proceedings, National Conference on Advances in Joining Technology, Hyderabad, pp. 45-51, January 23-24, 2004.
  3. N.K.Tewari and Pradeep Khanna ‘Mechanized Feeding: An integral element to manufacturing automation.’ Proceedings, UGC National Conference on Advances on Industrial Automation, Jodhpur pp. 18-25, March 20-21, 2004.
  4. Pradeep Khanna, Amit Gautam, Anirudh Gaur, Amit Juneja, Ambika Goel and Charumani, ‘Automated Feeding, Inspection, Stamping and Sorting System’, Proceedings, International Conference on Fluid Power Technology (EMCHAFT-2005), Chennai, vol. 1, pp 253-265, November, 27-28, 2005
  5. Ambika Goel, Charumani and Pradeep Khanna, ‘Rotary disc feeder: it’s performance analysis and study of various factors affecting it’, Proceedings, 14th International conference on Mechanical Engineering in Knowledge Age, New Delhi, vol. 1, pp. 421-428, December, 12-14, 2005.
  6. Akshat Gupta, Gunjan Agarwal, Natrajan Sankar and Pradeep Khanna, ‘Design, Fabrication and Analysis of a Reciprocating Funnel Feeder’, Proceedings, International conference on Advances in Mechanical Engineering, Punjab, pp. 228-234, December 1-3,2006.
  7. Akshat Gupta, Gunjan Agarwal and Pradeep Khanna. ‘Performance Analysis and Mathematical Modelling of a vibratory bowl feeder’, Proceedings, International conference on Advances in Manufacturing & Technology Management (ICAMTM 2007), Mumbai, pp. 492-497, January 18-20, 2007.
  8. Akshat Gupta, Girish Singhi, Gunjan Agarwal, Natrajan Sankar and Pradeep Khanna, ‘Design and Fabrication of an Agile Sorting and Feeding System’ Proceedings, World Congress on Engineering and Computer Science, 2007, San Fransisco, USA, pp. 542-547, October 24-26, 2007
  9. Rahul Pandhi, Sumit Khurana, Rajesh Rohilla and Pradeep Khanna “Intelligent Assistive Feeding Device for Physically Handicapped”, Proceedings, International Conference on Bioinformatics & Computational Biology, BIOCOMP-2007, Las Vegas, pp 243-247, June 25-28, 2007
  10. Pradeep Khanna, Astha Kukreja, Gaurav Kumar, Varsha Krishnan and Varun Kumar, ‘Design and Fabrication of External Gate Feeder and Study of Various factors affecting it’. Proceedings, National Conference on Emerging Trends in Mechanical Engineering, ( ETME-2008) Vallabh Vidyanagar, Gujarat, March, 28-29, 2008.
  11. Akshay Aggarwal, Astha Kukreja, Mayank Sharma, Pankaj Chopra and Pradeep Khanna ‘Stationary Hook Hopper Feeder: Design, Fabrication and Study of Various Factors Affecting it’. Proceedings, National Conference on Emerging Trends in Mechanical Engineering, (ETIME, 2008), BMS College of Engg. Bangalore, abstracted at pp-51, August 28-29, 2008.
  12. Pradeep Khanna, Shiwangi Goel, Aman Aggarwal, Arpit Chhabra and Gaurav, ‘Design and Fabrication of Automated Flipping Mechanism for Solar Cells’, Proceedings, National Conference on Emerging Trends in Mechanical Engineering, (ETIME, 2008), BMS College of Engg. Bangalore, abstracted pp-55, August 28-29, 2008.
  13. Charu Verma, J. Urvashi, Pradeep Khanna, Snigdha Anand and Usha Meena, “Reciprocating Fork Feeder: Its Performance Analysis and Study of Various Factors Affecting it”. Proceedings, International Conference on Advances in Mechanical Engineering (ICAME-2008), S.V. NIT, Surat, Gujarat, pp. 589-594, December, 15-17, 2008.
  14. Pradeep Khanna, Shiwangi Goel and Anju, “Design Fabrication and Analysis of Centerboard Hopper Parts Feeder”. Proceedings, International Conference on Advances in Mechanical Engineering (ICAME-2008), S.V. NIT, Surat, Gujarat, pp. 760-765, December, 15-17, 2008.
  15. Gunmeet Singh, Kumud Nishad, Divya, Apoorva Jain and Pradeep Khanna ‘Magnetic Elevating Hopper Feeder: Design Fabrication and Analysis of Various Factors Affecting it’, Proceedings, National Conference on Advances in Mechanical Engineering (NCAME 2009), MIT Moradabad, pp. 192-197, February 28 and March 1, 2009.
  16. Charu Verma, Snigdha Anand and Pradeep Khanna, “Design and Fabrication of Rotating Spoke Feeder and Study of Various Factors Affecting its Performance’. Proceedings, Internatioal Conference on Technology (ITECH-09), Amrutvahini College of Engineering, Sangamner, Maharashtra, abstracted pp. 125, March 4-5, 2009.
  17. Pradeep Khanna, Bikash Ranjan Shukla, Chakshu Jain and Sahil Thakkar, “Design and Fabrication of Centrifugal Hopper Feeder and Study of Factors affecting It”, Proceedings, International Conference on Advanced Manuacturing and Automation (INCAMA-2009), Kalaslingam University, Tamilnadu, abstracted pp. 151, March 26-28, 2009.
  18. Arjun Gupta, Bhanu Arora, Nihit Bhatnagar and Pradeep Khanna, “Elevation Hopper Feeder: Design, Fabrication and Study of Different Parameters”, Proceedings, International Conference on Advanced Manuacturing and Automation (INCAMA-2009), Kalaslingam University, Tamilnadu, abstracted pp. 152, March 26-28, 2009.
  19. Pradeep Khanna, Anju and Shiwangi Goel, “Mathematical Analysis of Centreboard Hopper Parts Feeder”, Proceedings, International Conference on Advanced Manuacturing and Automation (INCAMA-2009), Kalaslingam University, Tamilnadu, abstracted pp. 172, March 26-28, 2009.
  20. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Mathematical Modelling and Performance Analysis of a Tumbling Barrel Hopper Feeder”. Proceedings, International Conference on Recent Advances in Mechanical Engineering (ICRAME-2010), Kumaracoil, Tamilnadu, pp.294-298, April, 8-9 2010.
  21. Tanvi Gupta, Charu Garg Shachee Goswami and Pradeep Khanna, “Reciprocating Block Feeder: Its Performance Analysis and Study of Various Parameters Affecting it”. Proceedings, International Conference on Recent Advances in Mechanical Engineering (ICRAME-2010), Kumaracoil, Tamilnadu, pp.713-716, April, 8-9 2010.
  22. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Graphical Analysis of an Electropneumatic Fork Feeder”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 195-199, December 17-18, 2010.
  23. Aparna Gupta, Arjun Mehra, Neha Khemka and Pradeep Khanna, “Analysis of an External Gate Feeder”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 201-205, December 17-18, 2010.
  24. Pradeep Khanna, Rishabh Bansal and Swati Goyal, “Rotary Disc Feeder: Its Performance Analysis, Study of various factors affecting it and derivation of Mathematical Formula”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 207-210, December 17-18, 2010.
  25. Arjun Mehra, Dipika Berry, Manvi Govil and Pradeep Khanna, “Graphical Analysis of a Paddle Wheel Hopper Feeder”. Proceedings, 10th National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM, 2010), MNIT, Jaipur, pp. 217-221, December 17-18, 2010.
  26. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Performance and Graphical Analysis of a Tumbling Barrel Hopper Feeder”. Proceedings, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Thapar University, Patiala, Punjab, pp. 109-116, February 24-26, 2011.
  27. Charu Garg, Tanvi Gupta and Pradeep Khanna, “Mathematical Modelling and performance Analysis of a Reciprocating Block Feeder”. Proceedings, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Thapar University, Patiala, Punjab, pp. 117-123, February 24-26, 2011.
  28. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Mathematical Modelling and Performance Analysis of an Electro Pneumatic Fork Feeder”. Proceedings, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Thapar University, Patiala, Punjab, pp. 132-140, February 24-26, 2011.
  29. Astha Kukreja, Abhishek Monga and Pradeep Khanna, “Investigation of Process Capability of a Reaming Operation using Statistical Tools”. Proceedings, 2nd International Conference on Mechanical, Industrial and Manufacturing Techniques (MIMT-2011), Singapore, Vol. 1, pp. 589-593, February 26-28, 2011.
  30. Astha Kukreja, Pankaj Chopra, Akshay Agarwal and Pradeep Khanna, “Statistical Modelling Approach for Optimization of a Stationary Hook Hopper”. Proceedings, 2nd International Conference on Mechanical, Industrial and Manufacturing Techniques (MIMT-2011), Singapore, Vol. 1, pp. 594-598, February 26-28, 2011.
  31. Ankush Gupta, Arpit Saraf, Jitin Luthra, Nitin Gupta and Pradeep Khanna, “Regression Modelling and Analysis of a Tumbling Barrel Hopper Feeder”. Proceedings, International Conference on Emerging Trends in Engineering (ICETE-11), NMAM Institute of Technology, Nitte, Karnataka, pp. 601-606, May 4-5, 2011.
  32. Aparna Gupta, Arjun Mehra, Neha Khemka and Pradeep Khanna, “Graphical Analysis of External Gate Hopper Feeder”. Proceedings, International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Chandigarh, pp. 41-45, July 20-21, 2011.
  33. Arjun Mehra, Dipika Berry,Manvi Govil and Pradeep Khanna, “Analysis of the Paddle Wheel Hopper Feeder”. Proceedings, International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Chandigarh, pp. 46-50, July 20-21, 2011.
  34. Arjun Mehra, Manvi Govil, Swati Goyal and Pradeep Khanna, “Automated Parts Inspection System”. International Conference on Advances in Materials and Manufacturing Technology, Chitkara University, Chandigarh, pp. 205-207, July 20-21, 2011.
  35. Sonali Yadav, Arushi Malik and Pradeep Khanna, “Pneumatic Step Feeder: Its Performance Analysis and Study of various Parameters Affecting it”. Proceedings, 2nd National Conference on Recent Advances in Manufacturing (RAM-2011), S.V.NIT, Surat, pp. 57-62, September 15-17, 2011.
  36. Bhuvan Arora, Dharmendra Tarkar and Pradeep Khanna, “Design and Performance Analysis of a Slotted Rotary Disc Feeder”. International Journal of Technology and Engineering System (IJTES), Vol.2, No.1, pp. 49-53, Jan-March 2011.
  37. Pradeep Khanna and Arun Kanda, “Emerging Concepts of Agility- A Review”. Industrial Engineering Journal, Vol. II, Issue No.4, pp 28-34, April 2012.
  38. Ujjwal Tyagi, Garima Gupta and Pradeep Khanna, “Elevating Step Belt Feeder: Its Performance Analysis and Study of Various Parameters Affecting it”.National Conference on Emerging Trends in Mechanical Engineering (ETME-2012), Technocrats Institute of Technology, Bhopal, pp. 142-144, November29-30, 2012.
  39. Sonali Yadav and Pradeep Khanna, “Statistical Modelling Approach for Optimization of a Pneumatic Reciprocating Step Feeder”. International Journal of Power Control Signal and Computation (IPJCSC), Vol.5, No.1, pp.37-55, Jan-March, 2013.
  40. Alok Nahata, Ankush Agarwal and Pradeep Khanna, “Design Fabrication and Analysis of Magnetic Belt type Feeder”, Advanced Materials Research, Vols. 694-697 (2013) pp 2116-2120. Transtech Publications, Switzerland.
  41. Ankush Agarwal, Alok Nahata and Pradeep Khanna, “Mathematical Analysis of Magnetic Belt type Feeder”, International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol 3, Issue 1, pp. 8-16, September 2013.
  42. Ritika Punn, Shruti Bansal, Sakshi Jain, Meenakshi Goel and Pradeep Khanna, “Graphical Modelling Approach for Optimization of a Rotary Hook Feeder”. International Journal of Research in Mechanical Engineering & Technology (IJRMET), Vol.3, Issue 2, pp. 136-138, May-Oct 2013.
  43. Aakash Rajput, Isha Jain, Nidhi Gahlot and Pradeep Khanna, “Design, Fabrication and Graphical Analysis of a Scoop Wheel Feeder”. International Journal of Research in Mechanical Engineering & Technology (IJRMET), Vol.4, Issue 1, pp. 26-30, Nov 2013- April 2014.
  44. Sheetal Bhagat, Tanushi Pandey, Vishesh Garg and Pradeep Khanna, “Design, Fabrication and Analysis of Vibratory Feeder”. International Journal of Research in Mechanical Engineering & Technology (IJRMET), Vol.4, Issue 1, pp. 73-75, Nov 2013- April 2014.
  45. Tanushi Pandey, Vishesh Garg, Sheetal Bhagat and Pradeep Khanna, “Design, Fabrication and Analysis of Vibratory Feeder”. International Journal of Latest Trends in Engineering & Technology (IJLTET), Vol.4, Issue 1, pp. 315-325, May 2014.
  46. Ritika Punn, Shruti Bansal, Sakshi Jain, Meenakshi Goel and Pradeep Khanna, “Mathematical Modelling Approach for Optimization of a Rotary Hook Feeder”. Proceedings of The International Conference on Research and innovations in Mechanical Engineering,(ICRIME-2013). Lecture notes in Mechanical Engineering. DOI: 10.1007/978-81-322-1859-3_5, © Springer India, April 2014, pp. 47-56.
  47. Isha Jain, Nidhi Gahlot, Pradeep Khanna, Mukul Wadhwa and Prachi Garg, “Mathematical Analysis of Pneumatic Reciprocating Feeder”. International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.4, Issue 7, pp.635-640, July 2014.
  48. Syed Askari Raza Baqar, Yugal Raj Jain and Pradeep Khanna, “Vibratory Stress Relief Techniques: A Review of Present Trends and Future Prospects”. International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.4, Issue 11, pp.141-144, November 2014.
  49. Syed Askari Raza Baqar, Sheetal Bhagat, Tanushi Pandey and Pradeep Khanna, “Study of Temperature Distribution during MIG Welding of Low Carbon Steel”. International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.5, Issue 6, pp.209-213, June 2015. (ISSN 2250-2459)
  50. Yugal Raj Jain, Pradeep Khanna and D.V.Gadre, “Development of a Pneumatically Assisted Electronic Shifting System for Formula SAE Vehicles”. International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.5, Issue 8, pp.344-349, July 2015. (ISSN 2250-2459)
  51. Rahul Jain, Sheetal Bhagat, Tanushi Pandey, D.V.Gadre and Pradeep Khanna, “Design and Development of a Dual Channel Temperature Acquisition system to log Temperature Distribution in Base Plates during different Welding Operations”. International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.5, Issue 8, pp.158-162, August 2015. (ISSN 2250-2459)
  52. Ankita Verma, Anjali, Pradeep Khanna and Sanjay Gupta, “Graphical Analysis of a Vibratory Bowl Feeder using Channel Shaped Sheet Metal Components”. International Journal of Applied Engineering and Research (IJAER), special issue, Vol.10, No.78, pp. 69-73, November 2015. (ISSN 1087-1090)
  53. Pradeep Khanna and Sachin Maheshwari, “Effects of Wire Feed Rate, Voltage and Nozzle to Plate Distance on Welding Current in a MIG Welding Process”. Proceedings of the Vth International Symposium on Fusion of Science and Technology (ISFT-2016), New Delhi, pp. 305-310, January 18-22, 2016.
  54. Sanjit Raj, Shubham Gupta, Ankita Verma and Pradeep Khanna, “Development of a Magnetic Belt Type Feeder and Graphical Analysis of Feed Rate of Tubular Components”. Proceedings of the Vth International Symposium on Fusion of Science and Technology (ISFT-2016), New Delhi, pp. 325-332, January 18-22, 2016.
  55. Shubham Gupta, Pradeep Khanna and Sanjay Gupta, “Design and Development of an Automated Industrial Component Sorting System with digital Image Processing”. Proceedings of the Vth International Symposium on Fusion of Science and Technology (ISFT-2016), New Delhi, pp. 339-345, January 18-22, 2016.
  56. Sanjit Raj, Shubham Gupta and Pradeep Khanna, “Development of a Magnetic Belt Type Feeder and Mathematical Analysis of Feed Rate of Tubular Components”. International Journal of Computer and Mathematical Sciences (IJCMS), Vol.5, Issue 1, pp. 64-72, January 2016. (ISSN 2347-8527)
  57. Pranshoe Pandey, Kushagra Varshneya and Pradeep Khanna, “Elevated Step Feeder Design, Fabrication and Study of Effects of Operating Parameters on its Performance”. International Journal of Engineering Technology, Management and Applied Sciences (IJETMAS), Vol.4, Issue 1, pp. 89-93, January 2016. (ISSN 2349-4476)
  58. Anjli, Ankita Verma and Pradeep Khanna, “Mathematical Analysis of Channel Shaped Components Feeding in a Vibratory Bowl Feeder”. International Journal of electronics, Electrical and computational Systems (IJEECS), Vol. 5, Issue 2, pp. 124-133, February 2016 (ISSN 2348-117X).
  59. Avinash Khatri, Mayank Sethi and Pradeep Khanna,”Development of a Flexible Elevated Gravimetric Part Feeding System with Performance Analysis”. International Journal of Innovative Research in Science and Engineering (IJIRSE), Vol. 2, Issue 07, pp. 123-128, July 2016. (ISSN 2347-3207).
  60. Pradeep Khanna and Sachin Maheshwari, “Effects Welding Parameters on Weld Bead Characteristics during MIG Welding of Stainless Steel 409M”. Journal of Production Engineering, Vol. 19 (2) pp. 43 - 48, December 2016. (ISSN 1821-4932)
  61. Ujjwal Jindal, Shrey Jain, Piyush and Pradeep Khanna, “Graphical Analysis of a Vibratory Bowl Feeder for Clip Shaped Components”. International Journal of Innovative Science, Engineering and Technology (IJISET), Vol. 4, Issue 2, pp. 279 – 283, February 2017. (ISSN: 2348 – 7968).
  62. Hemant Yadav, Mohak Chawla and Pradeep Khanna, “Development of a Mechanical Rotary Part Feeding System with Performance Analysis”. International Journal of Innovative Research in Science Engineering and Technology (IJIRSET), Vol. 6, Issue 2, pp. 1600 – 1605, February 2017. (ISSN: 2319 – 8753)
  63. Pradeep Khanna and Sachin Maheshwari, “Microhardness Analysis in MIG Welding of Stainless Steel 409M”. Journal of Production Engineering, Vol. 20 (1) pp. 93 - 96, April 2017. (ISSN 1821-4932)
  64. Vivek Goyal, Rishabh Kandhari, Utkarsh Garg and Pradeep Khanna, “Graphical Analysis of Performance of Magnetic Disc Feeder”. International Journal of Advances in Electronics and Computer Science, Vol. 4, Issue 5, pp. 31-33, May 2017. (ISSN: 2393 - 2835)
  65. Ayush Raj, Daksh Narang and Pradeep Khanna, “Graphical Analysis of a Vibratory Bowl Feeder for Spherical Washers”. Journal of Material Science and Mechanical Engineering, Vol. 4, Issue 2, pp. 110-113, April-June, 2017. (ISSN:2393-9109)
  66. Ujjwal Jindal, Shrey Jain, Piyush and Pradeep Khanna, “Mathematical Analysis of Vibratory Bowl Feeder for Clip Shaped Components”. Journal of Production Engineering, Vol. 20 (1) pp. 122 - 126, June 2017. (ISSN 1821-4932)
  67. Dheeraj Kumar, Divyansh Agarwal, Govind Maheshwari and Pradeep Khanna, “Development of Mechnized Feeding System with Computational Analysis”. International Journal of Research in Engineering and Technology, Vol. 06, Issue 10, pp. 126-132, October 2017, (ISSN: 2319-1163)
  68. Daksh Narang, Ayush Raj and Pradeep Khanna, “Mathematical Modelling of a Bowl Feeder for Spherical Washers”. Journal of Production Engineering, Vol. 20 (2) pp. 93 - 96, November 2017. (ISSN 1821-4932)
  69.  Manik Kapoor, Tivish Allabadi, Umang Singhal and Pradeep Khanna, “Graphical Analysis of Bottle Caps Feeding in a Vibratory Bowl Feeder”. International Journal of Innovative Science Engineering and Technology, Vol. 4, Issue 12, pp. 118-122, December 2017. (ISSN: 2348-7968).
  70. Anshika Jain, Prachi Bansal and Pradeep Khanna, “Application of Taguchi Tecnique to Optimize the Performance of a Vibratory Bowl Feeder”. Global Journal on Innovation, Opportunities and Challenges in AAI and Machine Learning, Vol. 1, Issue. , pp. 13-18, 2017. (ISSN: 2581-5156).
  71. Pradeep Khanna and Sachin Maheshwari “Development of Mathematical Models for Prediction and Control of Weld Bead Dimensions in MIG Welding of Stainless Steel 409M”. Materials Today: Proceedings, Elsevier, Vol. 5, Issue 2, part- 1, pp. 4478-4488, 2018. 
  72. Pradeep Khanna and Sachin Maheshwari “Residual Stress Analysis in MIG Welding of Stainless Steel 409M”. Materials Today: Proceedings, Elsevier, Vol. 5, Issue 2, part-1, pp. 4939-4947, 2018.
  73. Prachi Bansal, Anshika Jain and Pradeep Khanna, “Development of a Reciprocatory Tube-Funnel Feeder and Graphical Analysis of its Performance”. Journal of Research in Mechanical Engineering and Applied Mechanics, Vol. 3, Issue 1, pp. 1-7, 2018.
  74. Shubham Kumar, Dasari Karthik, Sarthak Bhatia and Pradeep Khanna, “Smart Way of Garbage Monitoring System”. Journal of Electronics and Tele-communications Engineering, Vol. 3, Issue 1, pp. 1-9, 2018.
  75. Shubham Kumar, Dasari Karthik and Pradeep Khanna, “Development of Color Detection and Analyzing System”. International Journal of Research in Engineering and Technology, Vol. 7, Issue 6, pp. 49-56, June 2018. (ISSN: 2319-1163).
  76. Ishika Aggarwal, Nimeshka Faujdar, Anusua Das and Pradeep Khanna, “Mathematical Modelling for Predicting Angular Distortion in TIG Welding of Stainless Steel 409L Butt Welds”. International Journal of Research in Engineering and Technology, Vol. 7, Issue 6, pp. 92-97, June 2018. (ISSN: 2319-1163).
  77. Shubham Sachdeva, Vedant Sharma, Pratham Gupta and Pradeep Khanna, “Developmet of Voice Controlled Automatic Page Turning System”. International Journal of Research in Engineering and Technology, Vol. 7, Issue 6, pp. 86-91, June 2018. (ISSN: 2319-1163).
  78. Ishika Tiwari, Laksha and Pradeep Khanna, “Vibratory Bowl Feeder: A Graphical Analysis of its Performance for Feeding Nails”. International Research Journal of Engineering and Technology, Vol. 5, Issue 6, pp. 2638-2644, June 2018. (ISSN: 2395-0056).
  79. Anshika Jain, Prachi Bansal and Pradeep Khanna, “Development of Mathematical Models to Predict the Effect of Input Parameters on Feed Rate of a Reciprocatory Tube Funnel Feeder”. Journal of Production Engineering, Vol. 21, (1) pp. 67 - 71, June 2018. (ISSN 1821-4932)
  80. Shaine Ansari, Loveleen Gautam and Pradeep Khanna, “Graphical Analysis of Performance of a Vibratory Bowl Feeder for Feeding Buttons”. International Journal of Research in Engineering and Technology, Vol. 07, Issue 07, pp. 175-179, July 2018. (ISSN: 2319-1163).
  81. Rishav Kumar Jha, Ajay Kumar, Anubhav Chakraborty and Pradeep Khanna, “Effect of Process Parameters on Angular Distortion of GMAW Welded C 45 Plates”. International Journal of Research in Engineering and Technology, Vol. 07, Issue 07, pp. 86-91, July 2018. (ISSN: 2319-1163).
  82. Anshika Jain, Prachi Bansal and Pradeep Khanna, “Development of Mathematical Models to Analyze and Predict the Weld Bead Geometry in Submerged Arc Welding of Low Carbon Alloy Steel”. International Journal of Emerging Trends in Mechanical and Production Engineering, Vol. 2, Issue 1, pp. 1-12, 2018. (ISSN: 2581-4486).
  83. Manas Choudhary, Rishabh Narang and Pradeep Khanna, “Graphical Analysis of Performance of a Vibratory Bowl Feeder for Feeding Bottle Caps”. International Journal of Research in Engineering and Technology, Vol. 07, Issue 08, pp. 105-108, August 2018. (ISSN: 2319-1163).
  84. Shubham Jain, Paritosh Singhal and Pradeep Khanna, “Development of Mathematical Models to Analyse and Predict Weld Bead Geometry and Shape Relationships in GMA Welding of C 45 Steel”. International Journal of Research in Engineering and Technology, Vol. 07, Issue 08, pp. 156-166, August 2018. (ISSN: 2319-1163).
  85. Shubham Kumar Singh, Amar Nath and Pradeep Khanna, “Quarter Oscillating Feeder: A Graphical Analysis of its Performance for Feeding Spherical Components”. International Research Journal of Engineering and Technology, Vol. 5, Issue 7, pp. 1703-1708, July 2018. (ISSN: 2395-0056).
  86. Arjun Kumar Shah, Nilesh Kumar, M Vignesh and Pradeep Khanna, “Design and Fabrication of a Rebar Bending Machine”. Proceedings 2018 International Conference on Computing, Power and Communication Technologies (GUCON), pp. 1018-1021, Galgotia University, Greater Noida, U.P, India, September 28-29, 2018. (©2018 IEEE)
  87. Gantavya Vivek Punj, Niyajudin and Pradeep Khanna, “Development of Mathematical Models to Analyze and Predict Weld Bead Geometry and Shape Relationships in FCA Welding of C-45 Mild Steel”. Indian Welding Journal, Vol. 51, No. 4, pp. 75-85, October 2018. (ISSN: 0046-9092)
  88. Ishika Tiwari, Laksha and Pradeep Khanna, “Mathematical Modelling of Angular Distortion in GTA Welded Low Carbon Alloy Steel Butt Welds”. Proceedings, World Congress on Engineering and Computer Science, 2018, San Francisco, USA, pp. 634-638, October 23-25, 2018
  89. Shubham Kumar, Ashi, Pradeep Khanna, “Development of a Smart Identification and Sorting System”. Proceedings, World Congress on Engineering and Computer Science, 2018, San Francisco, USA, pp. 579-582, October 23-25, 2018
  90. Manas Choudhary, Rishabh Narang and Pradeep Khanna, “Design and Fabrication of a Programmable Selective Assembly System”. Proceedings, World Congress on Engineering and Computer Science, 2018, San Francisco, USA, pp. 558-563, October 23-25, 2018
  91. Bharat Sharma, Mohit Vashishta and Pradeep Khanna, “Development of Mathematical Models to Predict Weld Bead Geometry of Butt Welded HSLA Steel Plates in SAW Process”. International Research Journal of Engineering and Technology, Vol. 5, Issue 12, pp. 1375-1381, December 2018. (ISSN: 2395-0056).
  92. Manas Choudhary, Rishabh Narang and Pradeep Khanna, “Mathematical Analysis of a Vibratory Bowl Feeder for Feeding Bottle Caps”. Journal of Production Engineering, Vol. 21, (2) pp. 55 - 59, December 2018. (ISSN 1821-4932)
  93. Ishika Tiwari, Laksha and Pradeep Khanna, “Development of a Mathematical Model to Predict the Performance of a Vibratory Bowl Feeder for Headed Components”. Journal of Production Engineering, Vol. 21 (2) pp. 60 - 64, December 2018. (ISSN 1821-4932)
  94. Akash Sinha, Rahul Kumar, Samsh Niyaz and Pradeep Khanna, “To Develop a Weld Temperature Measuring System”. International Journal of Research in Engineering and Technology, Vol. 07, Issue 12, pp. 28-30, December 2018. (ISSN: 2319-1163).
  95. Ishika Aggarwal, Nimeshka Faujdar, Shivam verma and Pradeep Khanna, “Development of a Smart Flipping System”. International Research Journal of Engineering and Technology, Vol. 5, Issue 3, pp. 7669-7672, March 2019. (ISSN: 2395-0056).
  96. Manas Upreti, Ayush Singh, Ansh Malik and Pradeep Khanna, “Prediction of Angular Distortion in TIG Welded Stainless Steel 202 Sheets by Using Mathematical Modelling”. International Research Journal of Engineering and Technology, Vol. 06, Issue 04, pp. 4540-4545, April 2019. (ISSN: 2395-0056).
  97. Anshika Jain, Prachi Bansal and Pradeep Khanna, “Development of a Mathematical Model to Predict the Effect of Input Parameters on Tablet Feeding Rate of a Vibratory Bowl Feeder”. Journal of Production Engineering, Vol. 22 (2), pp. 47-51, June 2019, (ISSN: 1821-4932).
  98. Loveleen Gautam, Shaine Ansari and Pradeep Khanna, “Mathematical Analysis of Performance of a Vibratory Bowl Feeder for Feeding Buttons”. International Research Journal of Engineering and Technology, Vol. 06, Issue 07, pp. 1780-1786, July 2019. (ISSN: 2395-0056).
  99. Loveleen Gautam, Shaine Ansari and Pradeep Khanna, “Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Plates by Mathematical Modelling”. International Research Journal of Engineering and Technology, Vol. 06, Issue 07, pp. 1834-1841, July 2019. (ISSN: 2395-0056).
  100. Gaurav Nirman, Laksha and Pradeep Khanna, “Graphical Analysis of U-Shaped Components Feeding in a Vibratory Bowl Feeder.” International Research Journal of Engineering and Technology, Vol. 06, Issue 08, pp. 200-205, August 2019. (ISSN: 2395-0056).
  101. Priyam Maheshwari and Pradeep Khanna, “Cost and Weight Analysis of Automotive Mufflers using Computational Fluid Dynamics”. International Journal for Innovative Research in Science and Technology, Vol. 6, Issue 4, pp. 53-60, October, 2019. (ISSN: 2349-6010)
  102. Soumyashri Basu, Varun Gupta and Pradeep Khanna, “Mathematical Modelling to Predict Angular Distortion in Butt Welded Stainless Steel 304 Thin Plates”. Journal of Production Engineering, Vol. 21, (2) pp. 9-14, December 2019. (ISSN 1821-4932)
  103. Aditya Sachdeva, Rohan Kapoor, Awwal Singh and Pradeep Khanna, “Development of a Color and Orientation Detection System for Small Parts Feeding”. Smart Innovation, Systems and Technologies: Proceedings, Springer, Vol. 169, pp. 231-237, 2019.
  104. Pradeep Khanna and Sachin Maheshwari “Development of a Mathematical Model for Predicting Angular Distortion in Butt Welded Stainless Steel 409M Plated in GMAW Process”. Indian Welding Journal, Vol. 53, No. 1, pp. 57-66, January 2020. (ISSN: 0046-9092)
  105. Loveleen Gautam, Sahil Hanfi, Aayush Yadav and Pradeep Khanna, “Mathematical Modelling to Predict Bead Geometry and Shape Relationships of MIG Welded Aluminium 1200 Plates”. International Research Journal of Engineering and Technology (IRJET), Vol. 07, Issue 03, pp. 2729-2738, March, 2020 (ISSN: 2395-0056).
  106. Prithu Mishra, Shruti Sood, Mayank Pandit, Anshita Goel and Pradeep Khanna, “Additive Manufacturing (3D Printing): A Review on the Micro Fabrication Processes”. International Journal for Research in Applied Science & Engineering Technology (IJRASET), Vol. 8, Issue-IV, pp. 956-975, April 2020 (ISSN: 2321-9653)
  107.  Deeksha Narwariya and Pradeep Khanna, “To Investigate the Effects of Process Parameters on Welding Current of a MIG Welding Power Source”. International Journal of Engineering Research and Technology (IJERT), Vol. 9, Issue-05, pp. 185-188, May 2020 (ISSN: 2278-0181).
  108. Manish Dalakoti, Aditya Kumar and Pradeep Khanna, “Influence of Heat Input on Microstructure and Impact Strength in Dissimilar Metal Joining using MIG Welding”. International research Journal of Engineering and Technology (IRJET), Vol. 7, Issue 05, pp. 2627-2635, May 2020, (ISSN: 2395-0056). 
  109. Tejaswini Samal and Pradeep Khanna, “Prediction of Angular Distortion in MIG Welding of SS 202 Using Taguchi Technique”. International research Journal of Engineering and Technology (IRJET), Vol. 7, Issue 05, pp. 2636-2641, May 2020. (ISSN: 2395-0056)
  110. Tejaswini Samal, Laksha and Pradeep Khanna, “Factorial Approach to Estimate Angular Distortion in TIG Welding of High-Speed Low Alloy Steels”. Materials Today: Proceedings, Elsevier, Vol. 26, Part-2, pp. 1585-1589, 2020.
  111. Varun Gupta, Vinayak Mehra and Pradeep Khanna, “Mathematical Modelling to Predict Bead Geometry and Shape Relationships in MIG Welding of Stainless Steel 202”. Journal of Production Engineering, Vol. 23, (1), pp. 15-21, June 2020. (ISSN: 1821-4932)
  112. Rishabh Narang, Vibhu Maheshwari and Pradeep Khanna, “Prediction of Angular Distortion in MIG Welded Stainless Steel 409L Plates by Mathematical Modelling”. International Journal of Mechanical and Production Engineering, Vol. 8, Issue 6, pp 1-5, June 2020. (ISSN: 2321-2071)
  113. Aman Sehrawat, Dhruv Sharma, Artik and Pradeep Khanna, “Mathematical Modelling for Prediction of Angular distortion in MIG Welding of Stainless Steel 301”. International Journal for Research in Applied Science and Technology (IJRASET), Vol. 8, Issue-VII, pp. 884-890, July 2020. (ISSN: 2312-9653)
  114. Aman Sehrawat, Dhruv Sharma, Artik and Pradeep Khanna, “To Predict the Bead Geometry Parameters and Shape Relationships in MIG Welding of Stainless Steel 301 by Mathematical Modelling”. International Journal for Research in Applied Science and Technology (IJRASET), Vol. 8, Issue-VII, pp. 1094-1101, July 2020. (ISSN: 2312-9653)
  115. Aman Sehrawat, Dhruv Sharma, Artik and Pradeep Khanna, “Development of Mathematical Model to Predict Weld Dilution for GMA Welding of Stainless Steel 301”. International Journal for Research in Applied Science and Technology (IJRASET), Vol. 8, Issue VIII, pp. 57-65, August 2020. (ISSN:2312-9653)
  116. Awwal Singh Malhi, Hrehaan Singh, Saurabh Yadav and Pradeep Khanna, “Estimation of Angular Distortion of FCAW Welded SS 202 Plates by Mathematical Modelling”. International Research Journal of Engineering and Technology, Vol. 07, Issue 08, pp. 2997-3004, August 2020. (ISSN: 2395-0056).
  117. Mayank Pandit, Shruti Sood, Prithu Mishra and Pradeep Khanna, “Mathematical Analysis of the Effect of Process Parameters on Angular Distortion of MIG Welded Stainless Steel 202 Plates by Using the Technique of Response Surface”. Materials Today Proceedings, Elsevier, August 2020.
  118. Ishika Aggarwal, Nimeshka Faujdar and Pradeep Khanna, “Agility in Production Systems: Present Status and Future Prospects”. Operations Management and Systems Engineering, Lecture Notes on Multidisciplinary Industrial Engineering, Springer, Chapter-23, pp. 355-363, August 2020.
  119. Rohan Kapoor, Awwal Singh, Aditya Sachdeva, Indranil Ghosh and Pradeep Khanna, “Development of a Solar Powered Welding Power Source”. International Research Journal of Engineering and Technology, Vol. 07, Issue 09, pp. 296-301, September 2020. (ISSN: 2395-0056)
  120. Pradeep Khanna and R S Parmar, “Investigation of Heat Flow during MIG Welding of Stainless Steel 409M Plates and Prediction of Bead Parameters”. Indian Welding Journal, Vol. 53, No. 4, pp. 42-50, October 2020. (ISSN: 0046-9092)
  121. Kashish and Pradeep Khanna, “A Review of Arc Welding Defects: Implications Causes and Remedies”. International Journal of Multidisciplinary Educational Research, Vol. 9, Issue 11(4), pp. 168-186, November 2020. (ISSN: 2277-7881)
  122. Vinayak Mehra, Varun Gupta and Pradeep Khanna, “Mathematical Modelling to Predict Angular Distortion in MIG Welding of stainless Steel 202 Plates”. Journal of Production Engineering, Vol. 23(2), pp. 16-20, December 2020. (ISSN: 1821-4932)
  123. Mayank Tripathy and Pradeep Khanna, “Mathematical Analysis of Bead Parameters in MIG Welding of Stainless Steel 304”. Journal of Production Engineering, Vol. 23(2), pp. 28-32, December 2020. (ISSN:1821-4932).
  124. Prithu Mishra. Shruti Sood, Mayank Pandit and Pradeep Khanna, “Additive Manufacturing: Post Processing Methods and Challenges”. Advanced Engineering Forum, Vol. 39, pp 21-42, February 2021, Transtech Publications Ltd. Switzerland. (ISSN: 2234-991X).
  125.  

 

 

-12